Cross b temporary fence panels

Cross Brace temporary fencing panels with reasonable structure design

Specification

Pre Galvanized Steel Or Hot dipped Galvanized Treated available "Air Cooled" and "Water Cooled " 

Complied With ASTM392-06 standard chain link fabric 

Corrosion-Resistant Zinc Coating 

 Available in 4’, 6’ and 8’ Heights and a width 8' 9' 10' 12' 14' 

Post: 1 5/8” etc

Application

  Commercial Construction • Housing Developments • Remodels & Tenant Improvements • Public Works Projects • Post-Disaster Reconstruction 

Advantage

 • Secure In-Ground Installation • Installs in a Variety of Surfaces • Eliminates Digging and Debris Removal • Easy to Install, Maintain and Remove • Cost Effective vs. Permanent 

Technical

 

  • 360° full welded tubular frame. All pipes are 360° full welding circled to make sure a firm fence structure. This can ensure that the temporary fencing is not damaged during the frequent moving process, and will not be corroded even in hostile environment.
  • Hand craft techniques manufacture. Panels are filled with galvanized chain link mesh and wrapped around the frame tube with tension bars and tension bands by hand in a rather tension way.
  • Another option sturdy attached way. Available flat bar the use clamps to connect the two adjacent panels

Fence Base

  • No need to dig holes or laying foundations. Only need to place the base on a flat surface. If necessary, there are two 19 mm diameter pin holes on the flat feet to peg the footing on the ground when the install completes. Besides, there are fixed sand bags for anchoring.
  • Adaptable to all site-specific requirement. With good regional adaptability, the ground is not required to be absolutely flat, neither cement or asphalt areas.
  • Stable enough. Technical staff will give a reliable advice of fencing feet size according to the panel dimensions.
  • Three different styles are available. We provide following three types of fence feet for your standard and special demand.

Clamp

 

Another attached way designed for connecting chain link mesh panels and the frame tube together. Use high quality steel plate as raw material, specially moulded into various sizes to match with different size of fencing posts.

  • Versatile. Clamp center distance with 50mm 80, 90, 100 mm optional can match with fencing post diameter with 25, 28, 32, 38, 40, 42 mm.
  • Strong corrosion resistance. With hot dipped galvanized surface treatment, the clamps will not rust even in extremely severe weather.
  • Easy installation. Each set of clamp accessory list including 2 pieces clamps with 1 bolt and 1 nut. Just tighten the screws only by hand.。

PRODUCTION PROCESS

 Specified Grade Of Steel – Pipe Cutting – Welded Temp Fence Panel Frame – Hot-Dipped Galvanized – Chain Link Mesh Woven – Tie the Mesh With Frame – Packing – Shipment 

MAKE TEMPORARY PANEL ORDER FROM CONTRACT TO YOUR YARD

CONTRACT 30% DEPOSIT

CONTRACT 30% DEPOSIT

CONTRACT 30% DEPOSIT

image422

Sign a PI with a 30% deposit then do it through wire transfer 

FORWARD US A SLIP

CONTRACT 30% DEPOSIT

CONTRACT 30% DEPOSIT

image423

In Case we get a fine copy of payment slip we will start production 

Phurcase Tubing

CONTRACT 30% DEPOSIT

Phurcase Tubing

image424

In most of case these tubing need to custom length to meet cross temporary chain link panels welding usual these after payment the tube will arrival our factory 5-7 work days

Phurcase Wire

Woven Chain Link Fabric

Phurcase Tubing

image425

Hot dipped Galvanied wire Usual under stock so once we paid the wire will arrange transport to our chain link fabric immediately 

Woven Chain Link Fabric

Woven Chain Link Fabric

Woven Chain Link Fabric

image426

Our Workers will weave chain link fabric in exactly required size to meet cross brace temporary chain link fence panels usual the infilled mesh are shorter 0.5" all direction than then frame of temporary panels the process usual take 2-3 days for 1x40hc container 

Tube Cutting

Woven Chain Link Fabric

Woven Chain Link Fabric

image427

After 5-7 days waiting the steel tubing arrival our factory  our welding staffs will cutting pipes according temporary chain link fence panels and stand dimension such as 6'x10' we will cut tubing 2 pieces 6' and 10' deduct the 2 times outer diameter to make panels 

Punched Tube

Weld temporary frame

Welding Fence Stand

image428

Punched Tubing enable Horizontal tube can tally with vertical tubing of temporary chain link fence then full welding

Welding Fence Stand

Weld temporary frame

Welding Fence Stand

image429

Fully welding a temporary fence stand to meet customer required 

Weld temporary frame

Weld temporary frame

Hand tight mesh to frame

image430

According to customer required we will welding cross or horizontal brace 

Hand tight mesh to frame

Hand tight mesh to frame

Hand tight mesh to frame

image431

Top and bottom women will hand tighten up steel wire to each of chain link fabric mesh and right and left do same things or alternative flat far plus tension band 

Finish Temporary Panels

Hand tight mesh to frame

Finish Temporary Panels

image432

If temporary fence frame are black then these temporary chain link panels will arrange to hot dipped galvanized and if pre-galvanized our worker will do a cold zinc spray painted at all welds at a minimum 366gram/sqm

Packing and Shippment

Hand tight mesh to frame

Finish Temporary Panels

image433

After Panels and Temporary Fence stand packing in metal pallet we will booking container the shipping to port 

AMERICAN STANDARD TEMPORARY CHAIN LINK PANELS OPTIONAL

image434

SQUARE DESIGN FENCE BASE

OVAL DESIGN TEMPORARY FENCE STAND

OVAL DESIGN TEMPORARY FENCE STAND

TEMPORARY FENCE STAND WITH A SQUARE DESIGN 

image435

OVAL DESIGN TEMPORARY FENCE STAND

OVAL DESIGN TEMPORARY FENCE STAND

OVAL DESIGN TEMPORARY FENCE STAND

A REASONABLE STAND STABILITY TEMPORARY FENCE STAND

image436

STEEL PLATE FENCE BASE

OVAL DESIGN TEMPORARY FENCE STAND

STEEL PLATE FENCE BASE

STEEL PLATE FENCE BASE RECOMMEND THICKNESS 6.00MM 7.00MM 8.00MM ETC

Contact Us

Drop us a line!

Better yet, see us in person!

We love our customers, so feel free to visit during normal business hours.

HEBEI LINGNUO METAL WIRE MESH CO.LTD

United States Holocaust Memorial Museum, 100 Raoul Wallenberg Pl SW, Washington, District of Columbia 20024, United States

Hours

Open today

09:00 am – 05:00 pm