Chain link fence Panels with gate

Chain link fence Panels with gate often used to match with temporary chain link fence, designed with a width smaller than the opening to allow for gate hardware install. It provides a pedestrian and vehicle access way for your pre-defined area or prevents unauthorized intrusions into your open-air material storage. Our temporary chain link fence panels infilled with cyclone mesh implement the same strict testing and quality control process as our temporary chain link fence panels, fence feet and clamps.

SPECIFICATIONS

8′ chain link  panels with gates 6’x10′ temporary chain link fence with gates
8' chain link fence panels with gate 6x10 temporary chain link fence panels with gate
6’x12′ temporary fence panels with gates
6'x12' temporary chain link fence panels with gate
chain link fence panels with gate
Material Steel pipe, chain link mesh
Double swing leaf gate dimensions
Common dimensions (H × W) 3.5′ × 12′ 4′ × 10′ 4′ × 12′ 5′ × 10′ 6′ × 10′ 6′ × 12′
Actual dimensions (H × W) 3.5′ × 11.5′ 4′ × 9.5′ 4′ × 11.5 5′ × 9.5′ 5.79′ × 9.58.’ 6′ × 11.5.’
Fits Min Opening 12″ 10″ 12″ 10″ 10″ 12″
Fits Max Opening 144″ 120″ 144″ 120″ 120″ 144″
Single swing leaf gate dimensions
Common dimensions (H × W) 4′ × 4.’ 5′ × 3.5.’ 5′ × 4.’ 5′ × 6.’ 6′ × 4.’ 6′ × 6.’
Actual dimensions (H × W) 4′ × 3.66.’ 5′ × 3.16.’ 5′ × 3.66.’ 5′ × 6.’ 6′ × 3.66.’ 6′ × 6.’
Fits Min Opening 4″ 3.5″ 4″ 24″ 4″ 24″
Fits Max Opening 48″ 42″ 48″ 72″ 48″ 72″
Wire diameter Nine ga, 10.5 ga, 11 ga, 11.5 ga, 12 ga optional.
Mesh opening 2″, 2.25″, 2.375″, 2.4″, 2.75″ optional.
Frame O.D. 1.25″, 1.315″, 1.5″, 1.6″, 1.66″ optional.
Frame wall thickness 0.06″
Gatepost (O.D. × H) 2.36″ × 2.36″‘ × 0.06″
Post height 9.2′
Gate construction 360° full welded tubular frame and bent frame.
Fixed or adjustable Fixed
Surface treatment Hot dipped galvanized.

Pre-galvanized.

Attached way chain link fence panels with gate Mesh wrapped around the flat bar then connected with clamps.

Galvanized wire wrapped with steel frame in a rather tense way.

Gate wheel specification
Material Steel and non-pollution rubber.
Zinc thickness 42 microns.
Color Red, white, etc.
Surface treatment Hot dipped galvanized.

Pre-galvanized.

PRODUCTION CHAIN LINK FENCE GATE PANELS

  • Two styles of the frame are optional.
    • 360° full welded tubular frame. 360° full manual welding to make sure a firm gate structure. This will create 4 square corners there.
    • Bent frame. Constructed from a single steel tube with a diameter of 1.375″, which creates four bent corners.
    Temp chain link gate with the bent frame Temp chain link gate with welded frame
    temporary-chain-link-gate-bent-1 temporary-chain-link-gate-weld-1

    Feature chain link fence panels with gates

  • Handcraft techniques manufacture. Gate panels are filled with galvanized chain link mesh and wrapped around the frame tube with tension bars and tension bands by hand in a rather tense way.
  • Another option sturdy attached way. The available flat bar, then use clamps to connect the infill panel and the frame.
  • There are three styles for your choice.
    Single swing leaf temp chain link fence panels with gate Double swing leaf temp chain link gate
    single-swing-leaf-gate-1 double-swing-leaf-gate-1
  • Our chain link fence panels with gate Strong corrosion surface treatment.
    • Hot dipped galvanized. To ensure at least 42 microns thickness of zinc coating. Service life can reach more than ten years.
    • Pre-galvanized. 28 microns or at least 14 microns thickness of zinc coating is anti-corrosion can satisfy the normal applications

Reviews

There are no reviews yet.

Be the first to review “Chain link fence Panels with gate”

Your email address will not be published.

Shopping Cart